RMS Rated power output at 13,8 volts,
Nominal power in 4 ohm : 2 x 30-45 W
Typical power in 2 ohm : 2 x 80 W
Typical power in 1 ohm : 2 x 120 W
Typical power in 4 ohm bridge mode : 160 W
Typical power in 2 ohm bridge mode : 240 W |
| ULTIMATE series A1 is a small, powerful 2-channel amplifier
rated at 2 x 30 Watts. Typical output of 2 x 45 Watts with
4 ohm stereo and 160 Watts with 4 ohm mono bridge-connection.
Low-pass filter with three fixed positions, OFF/70/90 Hz.
Built-in/switchable variable high-pass filter 20-200 Hz. that
can be used as a subsonic filter or high-pass filter for front
systems. |
|

Mode : AB
Number of channels : 2
20 Hz - 20 kHz , 0,1% distortion.
S / N ratio, A-weighted : > 100 dB
Damping factor : > 200
Input impedance : > 10 kohm
Input sensitivity, variable : 0,2 - 7 V
Filter, highpass, variable : 20 - 200 Hz
Filter lowpass, variable : OFF / 70 Hz / 90 Hz
Terminal for external cooling fan : No
Current draw, idle : 0,5 A
Current draw, maximum : 32 A
Dimensions W x D x H : 205 x 240 x 73 mm (8,07 x 9,45 x 2,87 inch)
Weight : 2,8 kg ( 6,17 lb) |