ULTIMATE series A5, a three-channel amplifier
rated at 2 x 50 Watts in stereo an 1 x 300 Watts in mono. In
two ohm load it delivers 2 x 100 Watts in stereo and 1 x 500
Watts in mono. The mono channel is 1,33 ohm stable. Built-in
fan control. Built-in, variable 50-125 Hz switchable high-pass
filter and a 40 - 90 Hz low-pass filter for subwoofers. The
sub channel is also equipped with a disconnectable 25 Hz subsonic
filter.
The perfect amplifier for a good front system and one or more
subwoofers in the trunk. Remote sub level control that includes
phase shift control 0-180 degrees. |
| |
|

Output per channel at 13,8 volts,
20 Hz - 20 kHz , < 0,1% distortion.
Mode : AB
Number of channels : 3
Nominal power in 4 ohm : 2 x 50 W
Typical power in 4 ohm : 2 x 85 W
Typical power in 2 ohm : 2 x 100 W
Mono channel, nominal power in 4 ohm : 300 W
Mono channel, nominal power in 2 ohm : 500 W
S / N ratio, A-weighted : > 100 dB
Damping factor : > 200
Input impedance : > 10 kohm
Input sensitivity, variable : 0,2 - 7 V
Filter, front channels : Highpass: 50-125 Hz
Filter, mono channel : Lowpass: 40-90 Hz. Subsonic: 25 Hz
Phase shift control 0-180 degr. : Yes
Remote sub level control with phase control : Yes
Terminal for external cooling fan : Yes
Dual DC-inputs : No
Current draw, idle : 0,5 A
Current draw, maximum : 90 A
Dimensions W x D x H : 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch)
Weight : 6,6 kg ( 14,55 lb) |