 |
 |
 |
| DLS
REFERENCE RA40 4 Channel Amplifier |
|||||
|
 REFERENCE series RA40 is a 4-channel amplifier rated at 4 x 50 Watts. Provides a typical output of 4 x 75 Watts with 4-ohm stereo and 2 x 220 Watts in 4 ohm mono bridge-connection. Built-in variable 40-125 Hz switchable low-pass filter for subwoofers. Built-in/switchable variable 20-150 Hz high-pass filter that can be used as a subsonic filter or high-pass filter for front systems. Grand bass 0-18 dB. Phase shift control. High level input with automatic start. Frequency range : 10 Hz - 50 kHz S / N ratio, A-weighted : > 100 dB Damping factor : > 200 Input impedance, low level input : > 10 kohm Input impedance, high level input : 330 ohm High level input with auto start function : Yes nput sensitivity, variable : 0,2 - 7 V Grand bass filter : variable 0 - 18 dB Variable phase shift control for subwoofers : variable 0 - 180 degrees Filter, highpass, variable : 20 - 150 Hz on all channels Filter lowpass, variable : 40-125 Hz on ch. 3/4 Filter slope : 12 dB/octave Current draw, idle : 0,9 A Current draw, maximum : 50 A Dimensions W x D x H : 359 x 245 x 59 mm (14,1 x 9,65 x 2,33 inch) Weight : 4 kg ( 8,8 lb) |
||||
| M.S.R.P
$1,020.00 |
M.A.P $850.00 |
||||
 |
|
 |