| Classic series CA40 The Classic CA 40 is a powerful
amplifier with a nominal output of 4 x 50 Watts. With a mono
bridge-connection, it puts out all of 150 Watts. Built-in/switchable
low-pass and high-pass filters. Bass boost 25 Hz - 80 Hz 0-18
dB. Built-in protection circuits shut down the amplifier in
the event of overloads. Use it for a front system and a subwoofer.
High level input with auto start. |
| |
|

RMS output per channel at 13,8 volts
Mode : AB
Number of channels : 4
Nominal power output in 4 ohm (0,1% THD) : 4 x 50 W
Maximum power output in 2 ohm (0,2% THD) : 4 x 100 W
Max power output in 4 ohm bridge mode : 2 x 170 W
Frequency range : 10 Hz - 30 kHz
S / N-ratio, A-weighted : > 100 dB
Damping factor : > 100
Input impedance low level : > 10 kohm
Input impedance, high level : 100 ohm
Input sensitivity, variable : 0,25 - 5 V
High level input with auto start : Yes
Low level output : Yes
Filter channel A & B : HP: 15-500 Hz. LP: 50-500 Hz / 0,5 - 5
kHz (x10)
Filter channel C & D : HP: 15-500 Hz / 150 Hz - 5 kHz (x10) LP:
50 - 500 Hz
Phase control 0 - 180 degrees : No
Grand bass adjustable frequency : 25 - 80 Hz
Grand bass adjustable level : 0-18 dB
Current draw, idle : 1,0 A
Fuse value : 2 x 25 A
Dimensions H x D x B : 51,5 x 320 x 290 mm (2,03 x 12,60 x 11,42 inch)
Weight : 4,3 kg ( 9,5 lb) |