RMS Rated Power at 13.8 volts:
Nominal power in 4 ohm : 300 Watt
Nominal power in 2 ohm : 500 Watt
Nominal power in 1 ohm : 780 Watt
|
REFERENCE series RA10 is a mono amplifier
with Built-in variable 40-125 Hz low-pass filter and 25 Hz subsonic
filter.
Grand bass 0-18 dB. Phase shift control. High level
input with
automatic start. Remote bass level, phase control and
Built-in cooling fan. |
|

Mode : Class AB < 0,1% distortion.
Number of channels : 1
Frequency range : 10 Hz - 125 Hz
S / N ratio, A-weighted : > 100 dB
Damping factor : > 200
Input impedance, low level input : > 10 kohm
Input impedance, high level input : 330 ohm
High level input with auto start function : Yes
nput sensitivity, variable : 0,5 - 8 V
Grand bass filter @ 40 Hz : variable 0 - 18 dB
Variable phase shift control for subwoofers : variable 0 - 180 degrees
Remote bass level and phase control : Yes
Built-in cooling fan : Yes
Filter lowpass, variable : 40-125 Hz /12 dB slope
Subsonic filter : 25 Hz, 18 dB slope
Max cable size, DC-input : 4AWG / 21 mm2
Max cable size speaker output : 7AWG / 10 mm2
Protection : Current, DC-offset and thermal
Current draw, idle : 0,6 A
Current draw, maximum : 120 A
Dimensions W x D x H : 359 x 245 x 59 mm (14,1 x 9,65 x 2,33 inch)
Weight : 4,3 kg ( 9,5 lb) |